AMP STAND
The stand package includes:
- Standard carpet grey
- 2 x Long Arm Spotlights
- 1 x 500w Twin Socket
- 1 x High Table Round White
- 2 x High Stools White
- 1 x Brochure Rack A4
Please note that Furniture and electrical packages included in the stand package increase with stand size:
- 0 – 23 sqm receive 1 x package
- 24 -35 sqm receive 2 x packages
- over 36 sqm receive 3 x packages
Packages are based on multiples of 12sqm up to a maximum of 3 packages. If you need additional furniture, stand fitting, electrics, graphics or AV please order via your My Easyfairs account
Additional Information regarding the AMP Build
Please note the shell scheme packages come with electrics, furniture and carpet listed above. If you require any additional items such as furniture, graphics, extra electrics or standfitting these should be ordered through the Webshop which can be accessed via your MyEasyfairs account.
AMP Build Specifications:
1. White AMP walls with height of 2480mm.
2. The visible display are of each panel is 986mm x 2474mm.
3. For exhibitor reasons, all exhibitor materials must remain within the stand area.
4. You cannot fix anything to the wall panels using nails, staples, or screws. Lightweight polyboard or card panels can be fixed with double-sided Velcro, twinstick pads or blu-tack. Any damage to the AMP Panels will be chargeable to the exhibiting company.
If you are unsure about anything regarding your stand, please email lpw_ops@easyfairs.com
Stand Requirements & Regulations
Large/heavy exhibits
If you plan to exhibit a large or heavy piece of equipment or vehicle, please contact GES Logistics at the earliest time. Heavy Lifts by crane or forklift will be scheduled in advance. GES Logistics will schedule move-in and move-out of any large and heavy exhibits.
Lifting and handling onsite
GES Logistics have been appointed as our handling company. They are the preferred contractor for freight forwarding and storage, please contact them on +44 (0)121 782 4446 or event.logistics@ges.com OR via their online web service: Expresso by GES
Storage
It is not permissible to store packing materials (cases, pallets etc.) in the hall. GES Logistics will operate an empty case storage service: they will tag, remove, store and return your empty packing materials on request. Please order this service in by contacting the team on +44 (0)121 782 4446 or event.logistics@ges.com OR via their online web service: Expresso by GES
It is forbidden to store exhibits or materials between or behind stands due to the risk of fire.
Electrical Regulations
For safety and liability reasons, only the official electrical contractors, may carry out wiring and installation work at London Packaging Week. GES are the official Contractor for the exhibition; they are responsible and will carry out all work on the stands. Pre-fabrication is permitted but connection to the mains and all on-site wiring must be carried out by GES electricians.
The electrical facilities in the hall are subject to the regulations of the Local Authority and the venue. If the exhibitors’ power supply system is found to be faulty, or if it does not confirm to the relevant regulations in every aspect, the Organisers shall be entitled to refuse the connection of the system and/or the supply of power without recourse until the fault has been remedied.
We ask that you closely observe the deadline date for ordering electrical connections, to ensure that all orders can be processed, and services supplied in good time.
- Power connections are made as soon as possible to each stand. If you intend to dress your stand on the Tuesday morning, please note that electricity may not be available immediately.
- Power to all stands will be switched off each night 30 minutes after the show closes, unless a 24hr supply has been ordered in advance
Please contact the Operations team directly if you require a specific quote for a machinery main or a specific electrical supply.
Fire Regulations
All display materials must be flame retardant and conform to the UK legislation and eGuide. Failure in this will entail the removal of the offending fittings. All materials used in the building, decorations and coverings of stands must be approved, non-flammable materials. No explosives, flammable fluids or combustible materials may be used on any stand or stored within the venue. Fire Laws must be strictly observed, and wiring must comply with local regulation. A fire marshal may examine all stands, aisles, fire exits, and/or any other items at any time.
Patents & Copyrights
Exhibitors must comply with all relevant provisions of the Copyright Design and Patent Act of 1988. Applications should be lodged with the Patents Office, 25 Southampton Buildings, London, WC2A 1A. www.patent.gov.uk for more information.
Contractors
Any exhibitor choosing to use contractors, must ensure they conduct their business appropriately. Any contractor deemed by the venue or Show Management team to be working in an unsafe, un-responsible and/or in any other manner deemed inappropriate, will be asked to leave immediately. The contracting exhibitor will be responsible for sourcing an alternative supplier to complete any unfinished work and will be liable for any costs incurred for delay to build up times.
Please ensure that your Contractor receives a copy of this Exhibitor Manual. Details on how to access the halls for build-up will be sent out 2 weeks before the show. Please ensure you forward this information to your contractor.
Age Limit/Children
No one under the age of 16 is permitted in the hall during the build-up and breakdown period. Please consult our official website to find out about the age limit during open times.
Personal Protective Equipment (PPE)
Safety footwear and high visibility jackets must be worn during the construction phases of the build, as a minimum. Additional PPE identified in the exhibitor’s/contractor’s Risk Assessment must also be worn. Any person not wearing the appropriate items for the activities they are performing, will be asked to leave until they have acquired the necessary items.
Security
There will be constant security cover at the exhibition. The Organisers will take every reasonable precaution throughout the Exhibition; however, organisers’ security is designed to secure the exhibition hall, not the contents of individual stands.
Exhibitors should remember that exhibition halls are very vulnerable places and should take appropriate precautions against theft, ensuring that their goods are safeguarded. Exhibitors should not leave their stands unattended during the build-up, breakdown or open hours of the show, and they must ensure that Exhibitor Badges are worn at all times.
Any incidents of theft must be reported immediately to the Organisers’ so that security can be informed, and incident reports can be written. Please note the following security advice regarding exhibiting at shows:
- Build-up and breakdown: These are the most vulnerable times for theft. Ensure that there are at least two representatives setting up or dismantling your stand so that the stand is never left unattended. It is important that all products and portable items should be removed from your stand on the first evening of breakdown.
- Sufficient staffing: Be sure to have enough staff to man your stand at all times. Never ask a neighbouring Exhibitor to watch your They may become busy and leave your stand unattended.
- Avoid leaving your stand each evening before all visitors have cleared the exhibition hall, and ensure your stand is staffed prior to the show opening (remember the exhibition hall will be open from 8am for other Exhibitors and maintenance staff).
- Lockable Cabinets: There is no cabinet included in your package. We do, however, recommend you have somewhere to lock away briefcases, mobile phones, handbags and laptops etc. during the day – even when you are on the stand. If you are busy, you may not notice if they are. Please note – most hired cabinets have common locks and should not be regarded as completely secure units.
NB: Please make sure adequate arrangements have been made to insure your goods, as Easyfairs are not liable for any loss, damage or accident that may occur to any Exhibitors property (hired or purchased) or personnel. Therefore, Exhibitors MUST arrange full insurance cover.
Dilapidation & floor covering
Exhibitors are liable for any damage they may cause to buildings, floors, walls, and columns or to any shell scheme equipment or any other Exhibitor’s property. Exhibitors are also responsible for any damage caused by their agents or contractors. No Exhibitor may apply paint, lacquer, adhesives or coatings to the building or shell scheme, or drill holes into the floor.
The Organisers will inspect every site before erection and after demolition of the stands and any damage caused will be charged directly to the Exhibitor. This includes a charge for removing any carpet tape or heavy building waste left behind.
All stands require appropriate floor covering. The hall floor cannot be exposed. Floorcovering can be ordered from the shop accessed via your ‘My Easyfairs’ account. If you are laying your own floorcovering, please ensure you use exhibition approved carpet tape which will not leave marks on the hall floor when it is removed. Other forms of fixing to the hall floor, such as cable clips, nails and bolts are prohibited. Please be advised that all carpet tape must be removed at the end of the show to avoid any dilapidation charges.
Alcohol
Any sale or supply of alcohol at the show must be agreed and licensed by the venue. Selling alcohol for consumption at the show is not permitted. Please note that there should be no consumption of alcohol during build up and breakdown.
Catering: ExCeL London Hospitality are the exclusive caterers for the venue and all food and drink must be ordered via them. Please note that concessions/corkage charges are incurred when providing your own beverages/food at the show including coffee machines, therefore should you be planning on bringing anything for your stand please contact our show events coordinators.
Distribution of promotional material & demos
Exhibitors may only conduct business and distribute literature from within their stand, not in the gangways or any other part inside or outside of the Hall. Exhibitors must not take delegates away from the event to another business’ premises, nor host competing events onsite. All activities and demonstrations (e.g. the operation of machines, video and film shows etc.) must be reported in the exhibitor’s Risk Assessment and have the approval of the Operations team. The Operations team is entitled to restrict or prohibit such demonstrations, even if consent has previously been given, if they interfere with the Exhibition.
Noise levels & music system
Music and commentary for demonstrations, videos, presentations etc., using music systems such as a Public Address (PA) or AV Equipment etc., also requires authorization. Exhibitors must ensure the sound is kept to an acceptable level (below 80 decibels from the edge of the stand) and does not disturb adjacent exhibitors. In case of dispute, the Show Management’s decision will be final.
Please Note
The regulations below are supported by and should be followed in conjunction with the current eGuide, available here
If you are laying your own floor covering, please ensure you use exhibition approved carpet tape which will not leave marks on the hall floor when it is removed. Other forms of fixing to the hall floor, such as cable clips, nails and bolts are prohibited. Please be advised that all carpet tape must be removed at the end of the show to avoid any dilapidation’s charges.
Electrics can be ordered from the shop accessed via your ‘My Easyfairs’ account. If your electrical requirements are not listed in the online catalogue, please contact lpw_ops@easyfairs.com
All rigging must be approved by the Organiser and included in your stand plans. Please contact the Operations team in the first instance with details of what you would like to rig.
Please ensure that your contractors receive a Link to this exhibitor manual and the pre-show email detailing build and break information.
If you require any water & waste services for your stand, please contact ExCel london to place your order.
The Organisers will provide a pre-clean of all stands prior to show open and will also on the open days provide daily cleaning of the halls, the gangways and carpets on the stands. The cleaning of exhibits is not included.
Exhibitors and contractors must arrange the removal of materials and waste produced by working demonstrations of exhibits and stand fitting materials, crates and exhibits abandoned within ExCel.